RelaxДом

Быстрый поиск

Расширенный поиск

Авторизация

Запомнить? | Забыл пароль?
 
Register
Welcome
 
Web-программирование Perl, PHP, JavaScript, HTML и другие языки под веб.

Ответ
Непрочитано 30.06.2008, 17:22   #1
Yaposha Мужской

 
Где я ?
Регистрация: 26.05.2008
Сообщений: 2
pm
По умолчанию помогите по форуму

Я скачал форум там много папок
я не знаю что делать на аппаче хочу
поставить подскажите как быть?
Yaposha вне форума   Ответить с цитированием
Непрочитано 30.06.2008, 21:54   #2
Сгущёное молочко Мужской

Аватар для Сгущёное молочко
 
Буду тут жить
Регистрация: 05.01.2008
Сообщений: 81
pm
По умолчанию Re: помогите по форуму

Закинь все папки в папку где у тебя сайт, потом пиши 127.0.0.1(если IPB)!
Если Булка то 127.0.0.1/install/install.php
Если что то другое то просто 127.0.0.1
Сгущёное молочко вне форума   Ответить с цитированием
Непрочитано 01.07.2008, 09:47   #3
Yaposha Мужской

 
Где я ?
Регистрация: 26.05.2008
Сообщений: 2
pm
По умолчанию Re: помогите по форуму

да короче у меня так не получается вот посмотрите сами ниже картинку
и пожалуйста помогите. Кстати у меня denver.
Изображения
Тип файла: jpg forum.JPG (173.2 Кб, 76 просмотров)
Yaposha вне форума   Ответить с цитированием
Непрочитано 01.07.2008, 11:06   #4
Gia Мужской

Аватар для Gia
 
Буду тут жить
Регистрация: 16.12.2007
Сообщений: 91
pm
По умолчанию Re: помогите по форуму

сам бы посидел и подумал, тут ничё сложного нет только мозги включить и подумать, я младше тебя был подумал и разобрался
"если ты изначально при первых затруднениях будешь уходить от сложностей, бегать и просить о помощи ты потом всё время будешь так делать и самостоятельно ничего не добьешься" (с)Sir-D, надо учится развивать свое мышление
p/s/ парень просто не может разобратся с базой данных=\ хотите помогайте я лично не стану
Gia вне форума   Ответить с цитированием
Непрочитано 01.07.2008, 11:43   #5
Сгущёное молочко Мужской

Аватар для Сгущёное молочко
 
Буду тут жить
Регистрация: 05.01.2008
Сообщений: 81
pm
По умолчанию Re: помогите по форуму

Цитата:
Сообщение от Yaposha [Ссылка заблокирована: Зарегистрируйтесь!]
да короче у меня так не получается вот посмотрите сами ниже картинку
и пожалуйста помогите. Кстати у меня denver.
Так, у тебя булка(vBulletin)
Сначало заходи в папка_с_сайтом/includes/config.php.in
config.php.in переименуй в config.php
Потом открой через блокнот config.php, и исправь подключение к базе данных что то типо
PHP код:
<?php
/*======================================================================*\
|| #################################################################### ||
|| # vBulletin 3.6.7 PL1
|| # ---------------------------------------------------------------- # ||
|| # All PHP code in this file is ©2000-2007 Jelsoft Enterprises Ltd. # ||
|| # This file may not be redistributed in whole or significant part. # ||
|| # ---------------- VBULLETIN IS NOT FREE SOFTWARE ---------------- # ||
||
|| #################################################################### ||
\*======================================================================*/

/*-------------------------------------------------------*\
| ****** NOTE REGARDING THE VARIABLES IN THIS FILE ****** |
+---------------------------------------------------------+
| If you get any errors while attempting to connect to    |
| MySQL, you will need to email your webhost because we   |
| cannot tell you the correct values for the variables    |
| in this file.                                           |
\*-------------------------------------------------------*/

    //    ****** DATABASE TYPE ******
    //    This is the type of the database server on which your vBulletin database will be located.
    //    Valid options are mysql and mysqli, for slave support add _slave.  Try to use mysqli if you are using PHP 5 and MySQL 4.1+
    // for slave options just append _slave to your preferred database type.
$config['Database']['dbtype'] = 'mysql';

    
//    ****** DATABASE NAME ******
    //    This is the name of the database where your vBulletin will be located.
    //    This must be created by your webhost.
$config['Database']['dbname'] = 'меняй на своё';

    
//    ****** TABLE PREFIX ******
    //    Prefix that your vBulletin tables have in the database.
$config['Database']['tableprefix'] = 'vb_';

    
//    ****** TECHNICAL EMAIL ADDRESS ******
    //    If any database errors occur, they will be emailed to the address specified here.
    //    Leave this blank to not send any emails when there is a database error.
$config['Database']['technicalemail'] = '[email protected]';

    
//    ****** FORCE EMPTY SQL MODE ******
    // New versions of MySQL (4.1+) have introduced some behaviors that are
    // incompatible with vBulletin. Setting this value to "true" disables those
    // behaviors. You only need to modify this value if vBulletin recommends it.
$config['Database']['force_sql_mode'] = false;



    
//    ****** MASTER DATABASE SERVER NAME AND PORT ******
    //    This is the hostname or IP address and port of the database server.
    //    If you are unsure of what to put here, leave the default values.
$config['MasterServer']['servername'] = 'localhost';
$config['MasterServer']['port'] = 3306;

    
//    ****** MASTER DATABASE USERNAME & PASSWORD ******
    //    This is the username and password you use to access MySQL.
    //    These must be obtained through your webhost.
$config['MasterServer']['username'] = 'меняй на своё';
$config['MasterServer']['password'] = 'меняй на своё';

    
//    ****** MASTER DATABASE PERSISTENT CONNECTIONS ******
    //    This option allows you to turn persistent connections to MySQL on or off.
    //    The difference in performance is negligible for all but the largest boards.
    //    If you are unsure what this should be, leave it off. (0 = off; 1 = on)
$config['MasterServer']['usepconnect'] = 0;



    
//    ****** SLAVE DATABASE CONFIGURATION ******
    //    If you have multiple database backends, this is the information for your slave
    //    server. If you are not 100% sure you need to fill in this information,
    //    do not change any of the values here.
$config['SlaveServer']['servername'] = 'localhost';
$config['SlaveServer']['port'] = 3306;
$config['SlaveServer']['username'] = 'меняй на своё';
$config['SlaveServer']['password'] = 'меняй на своё';
$config['SlaveServer']['usepconnect'] = 0;



    
//    ****** PATH TO ADMIN & MODERATOR CONTROL PANELS ******
    //    This setting allows you to change the name of the folders that the admin and
    //    moderator control panels reside in. You may wish to do this for security purposes.
    //    Please note that if you change the name of the directory here, you will still need
    //    to manually change the name of the directory on the server.
$config['Misc']['admincpdir'] = 'admincp';
$config['Misc']['modcpdir'] = 'modcp';

    
//    Prefix that all vBulletin cookies will have
    //    Keep this short and only use numbers and letters, i.e. 1-9 and a-Z
$config['Misc']['cookieprefix'] = 'bb';

    
//    ******** FULL PATH TO FORUMS DIRECTORY ******
    //    On a few systems it may be necessary to input the full path to your forums directory
    //    for vBulletin to function normally. You can ignore this setting unless vBulletin
    //    tells you to fill this in. Do not include a trailing slash!
    //    Example Unix:
    //      $config['Misc']['forumpath'] = '/home/users/public_html/forums';
    //    Example Win32:
    //      $config['Misc']['forumpath'] = 'c:\program files\apache group\apache\htdocs\vb3';
$config['Misc']['forumpath'] = '';



    
//    ****** USERS WITH ADMIN LOG VIEWING PERMISSIONS ******
    //    The users specified here will be allowed to view the admin log in the control panel.
    //    Users must be specified by *ID number* here. To obtain a user's ID number,
    //    view their profile via the control panel. If this is a new installation, leave
    //    the first user created will have a user ID of 1. Seperate each userid with a comma.
$config['SpecialUsers']['canviewadminlog'] = '1';

    
//    ****** USERS WITH ADMIN LOG PRUNING PERMISSIONS ******
    //    The users specified here will be allowed to remove ("prune") entries from the admin
    //    log. See the above entry for more information on the format.
$config['SpecialUsers']['canpruneadminlog'] = '1';

    
//    ****** USERS WITH QUERY RUNNING PERMISSIONS ******
    //    The users specified here will be allowed to run queries from the control panel.
    //    See the above entries for more information on the format.
    //    Please note that the ability to run queries is quite powerful. You may wish
    //    to remove all user IDs from this list for security reasons.
$config['SpecialUsers']['canrunqueries'] = '';

    
//    ****** UNDELETABLE / UNALTERABLE USERS ******
    //    The users specified here will not be deletable or alterable from the control panel by any users.
    //    To specify more than one user, separate userids with commas.
$config['SpecialUsers']['undeletableusers'] = '';

    
//    ****** SUPER ADMINISTRATORS ******
    //    The users specified below will have permission to access the administrator permissions
    //    page, which controls the permissions of other administrators
$config['SpecialUsers']['superadministrators'] = '1';

    
// ****** DATASTORE CACHE CONFIGURATION *****
    // Here you can configure different methods for caching datastore items.
    // vB_Datastore_Filecache  - for using a cache file
// $config['Datastore']['class'] = 'vB_Datastore_Filecache';
    // vB_Datastore_Memcached - for using a Memcache server
    // It is also necessary to specify the hostname or IP address and the port the server is listening on
/*
$config['Datastore']['class'] = 'vB_Datastore_Memcached';
$i = 0;
// First Server
$i++;
$config['Misc']['memcacheserver'][$i]        = '127.0.0.1';
$config['Misc']['memcacheport'][$i]            = 11211;
$config['Misc']['memcachepersistent'][$i]    = true;
$config['Misc']['memcacheweight'][$i]        = 1;
$config['Misc']['memcachetimeout'][$i]        = 1;
$config['Misc']['memcacheretry_interval'][$i] = 15;
*/
// ****** The following options are only needed in special cases ******

    //    ****** MySQLI OPTIONS *****
    // When using MySQL 4.1+, MySQLi should be used to connect to the database.
    // If you need to set the default connection charset because your database
    // is using a charset other than latin1, you can set the charset here.
    // If you don't set the charset to be the same as your database, you
    // may receive collation errors.  Ignore this setting unless you
    // are sure you need to use it.
// $config['Mysqli']['charset'] = 'utf8';

    //    Optionally, PHP can be instructed to set connection parameters by reading from the
    //    file named in 'ini_file'. Please use a full path to the file.
    //    Example:
    //    $config['Mysqli']['ini_file'] = 'c:\program files\MySQL\MySQL Server 4.1\my.ini';
$config['Mysqli']['ini_file'] = '';

// Image Processing Options
    // Images that exceed either dimension below will not be resized by vBulletin. If you need to resize larger images, alter these settings.
$config['Misc']['maxwidth'] = 2592;
$config['Misc']['maxheight'] = 1944;

/*======================================================================*\
|| ####################################################################
|| # Downloaded: 11:02, Thu May 17th 2007
|| # CVS: $RCSfile$ - $Revision: 16258 $
|| ####################################################################
\*======================================================================*/
И потом 127.0.0.1/install/install.php
Всё!
Сгущёное молочко вне форума   Ответить с цитированием
 
Ответ


Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)
 
Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход